Hill Technical Sales is excited to announce being appointed the Midwest representative for Jasper Electronics! With nearly 30 years of experience, Jasper Electronics is renowned for manufacturing top-notch, efficient power supplies and consistently delivering quality equipment. Their unwavering commitment to 100% customer satisfaction and exceptional engineering sets them apart.
Jasper’s products are not only high quality and reliable but also offer optional ruggedization to protect against vibration, shock, and humidity. We specialize in custom designs tailored to meet the unique needs of your projects. Get ready to experience unparalleled quality and performance with Jasper Electronics!
Traffic Control Power Supplies
Jasper Electronics is a leader in traffic control power supplies designing and manufacturing. Compared to legacy supplies, Jasper’s traffic control units are more compact, more lightweight, and more efficient. They are also California, New York, Georgia, Alabama, Colorado, and other’s primary choice for their state departments of transportation. These power supplies come with 5-48 VDC and 70-400 Watts and are available to be used in new, existing, and custom configurations. They are highly reliable and have both single and multiple outputs.
Traffic Control Power Supplies
PDAs – Model PDA2-LS
We are showing off our custom Power Distribution Assembly (PDA), the model PDA2-LS, which manages the intake of AC power and distributes AC and DC power to a traffic control cabinet’s circuit. It can be used in configurations that are both either new and existing.
This assembly is powered by three AC circuits that are obtained from the Service Panel Assembly; each being terminated at a 15 Amp circuit breaker. From the front panel, you can access the NEMA type 5-15R GFCI duplex receptacle, which is powered by “AC+ Equip”. In the rear panel, there is an “ER2”, which is a type 5-15R non-GFCI receptacle. The majority of the circuitry both within and connected to the assembly is powered by “+AC RAW”. An EDCO Model SHA-1250 ITS (or equal) surge protector and EMI filter allows “+AC CLEAN” to pass through.
There are two user-accessible slots that can be used to install a Model 204 Flasher Unit in each, thereby providing four signal drives that alternate. The power on these models is controlled on the front panel using a two-pole 20 Amp circuit breaker. Six 10 Amp signal circuit breakers are wired to terminal blocks located in the rear cover, and those are then wired to the outer Output File Assembly.
The PDA2-LS is compact but has room for customization, and in 336LS and 346LX cabinets, it has room for a drawer shelf for laptop support.
Compact PCI Power Supplies
We have both AC and DC input models available for our compact PCI power supplies, with options from 175-500 W. Our AC/DC has 90-264 VAC input, and our DC/DC has 18-72 VDC input. Both have model options of 175-500 Watts with 3U & 6U x 8HP. These models have active PFC, and the option to be ruggedized. They have hot swap and Oring diodes N+1 operation and use a standard 47-pin output connector, with some models that have 32 & 38-pin options. For 3.3, 5, and +12V rails, they also feature current sharing.
Specialty Switching Power Supply Modules
There are single and multiple output options for our specialty switching power supplies modules, with compact sizes of 1U high, high density, and the choice to be ruggedized. Our input voltages for these models range from 90-264 VAC, outputs range from 12-54 VDC, and a power rating of 200-1500 Watts. Our output power ranges from 200W-1500+W. The hot swapping for these modules is N+1 redundant and has internal Oring diodes. These modules also have 12-54 VDC outputs and a variety of standby voltages. They have full power to 50C ambient with a derating to 70C and a >0.99 line power factor corrected which is typical at AC 115V.
JBPA-Series Power Supplies
The new JBPA-series power supplies have both configurations for convection and forced-air cooling. Some of our models in this series also have a PMBus interface to manage the power supply module’s essential functions, with customization available. They feature 120W to 3.8KW and have your choice of outputs from 12-56V and full range input of 90-264VAC.
Specialty Rack Mount Switching Power Supplies
Do your redundant systems need hot-swap power supplies of excellent quality? Use our high-density specialty rack mount switching power supplies! We have 12-54VDC redundant outputs and options when it comes to standby voltages. We also have single or mixed output voltages with 200-10,000 watt power ratings, and 2 to 8 slots. Our standard configurations are 1-6U high and have a width of 19.0-23.0 inches. The hot swap in these power supplies is N+1 redundant with internal Oring diodes. They also feature full power to 50C ambient with a derating of 70C and >0.99 line Power Factor Corrected typically at AC 115V. We have AC (90-264 VAC) and DC of the single, dual, and individual unit varieties. These power supplies units can also be ruggedized.
GPAD-Series Convection/Conduction Cooled Power Supplies
Are you tired of having to periodically clean your fans, worrying about fan failure, dealing with irritating fan noises, and want to improve your MTBF performance in your cooling power supplies? We eliminate the need for fans entirely with our GPAD-Series convection/conduction-cooled power supplies! These models can operate in temperatures -20°C to +70°C, and feature a moisture-proof design that is flame retardant. We also offer protection for output short circuits, over-current, over-voltage, and over-temperature situations.
These models are best for applications with high current, low-voltage, high power density. They have a power rating of 200-500 W, output voltages of 12-54VDC, input voltages of 90-264VAC, a power factor of ≥0.95, and a low leakage current of ≤0.7mA. They also come in a compact size of 255 x 50 x 30 mm, and two supplies can be used in parallel. These models can be ruggedized, and each comes with a three-year warranty.
External Power Supplies
We offer external power supplies and IEC Power Adapters have 6-250 Watts with output voltages 5-54V and 3.3-50 VDC, and we also have single and multiple outputs. There is also a vast array of standard output connectors for sale.
We carry Medical External Power Supplies along with these, has options between 4.5-310 Watts and an output voltage of 5-56 V. Medical IEC adapters with standard and custom configurations are also available.
All of our External Power Supplies have 90-264 VAC input and desktop 2 & 3 Pin AC input possibilities. They also offer both fixed and detachable I/O cords. We provide a wide variety of standard output connectors, special connectors, with different colors and cable lengths. Standard pricing and low MOQs are offered across all of these models.
If you would like to check out a variety of products that we handle that could suit your needs, please check out our website and submit a quote at https://hill-tech.com/, or contact us at 847-255-4400, fax us at (847) 255-0192, or email us at sales@hilltech.com. And be sure to look at our social media pages, linked below!
Hill Technical Sales provides expert design and implementation of quality components for Electrical Power Conversion & Distribution, Thermal Management, UV Curing, and High-Speed Industrial Imaging for more information:
Connect with us: 
