Inverter Driven Centrifugal Blower for Clean Room Applications

Posted on October 19, 2009 by

ARLINGTON HIEIGHTS, ILLINOIS, USA, October 19, 2009: Hill Tech Sales, a leader in components for electrical power conversion is announcing Inverter Driven Centrifugal Blower used for Clean Room Applications.

These blowers are designed to have a high output while running quiet with minimum energy input. The high efficiency designed motor allows only a ten degree temperature rise at its rated air output of 375 CFM at 0″ H2O. The inverter outputs a constant 230vac, three phase at 60hz thus allowing for a common input of 220vac, single phase at either 50 or 60Hz. This enables the blower to have a constant output in countries throughout the world.

An IEC 60320 shrouded male plug terminates to the blower with a 15 foot International Harmonized 3 x 1.00mm2 cord set. The rotor is dynamically balanced and incorporates ball bearings providing a quiet long life. The air inlet and outlet accommodate 4″ flexible duct. Construction, materials and finishes enable us to meet MIL-SPECS and operate in harsh environments as well as in the office, lab or clean room.

See some of the custom blowers Hill Technical has created for their customers at www.hilltech.com

For more information, contact:

Alena Kamin
Customer Service Manager
Hill Technical Sales
216 West Campus Drive
Arlington Heights, IL 60004    
Tel: +1- 847-255-4400  ext 13
Fax: +1-847-255-0192     

You my also visit: http://www.hilltech.com/

Posted in News | Tagged | Leave a comment

Just four steps to getting the Fuse that suits your needs

Posted on October 5, 2009 by

ARLINGTON HIEIGHTS, ILLINOIS, USA, Oct 05, 2009:   Hill Tech Sales, a leader in Photovoltaic technology. Today is  introducing a link to the four steps to getting a “ PV Fuse that suits your needs”. 

This article is an  invaluable document in how to determine rated values that enable optimum use of PV Fuse Links for PV Installations.

For more information, contact:

Alena Kamin
Customer Service Manager
Hill Technical Sales
216 West Campus Drive
Arlington Heights, IL 60004   
Tel: +1- 847-255-4400  ext 13
Fax: +1-847-255-0192    

You my also visit this hilltech link

Posted in Learning Center | Tagged , , , , | Leave a comment

AMSR1-78Z: Smallest DC- DC switching regulators with 1A output current

Posted on September 28, 2009 by

ARLINGTON HIEIGHTS, ILLINOIS, USA, September 28, 2009: Hill Tech Sales, a leader in components for electrical power conversion is proud to introduce the smallest DC- DC switching regulators with 1A output current

This a new Aimtec series of non-isolated, DC-DC switching regulators which produce a high output current of 1A within one of the smallest SIP3 packages, measuring only 11.7 x 7.4 x 10.2mm for lower profile circuit implementations such as portable power and standby-power applications.   

This is a feature rich alternative to 78xx linear regulator. For example the AMSR1-78Z step-down converters accept wide inputs ranging from 4.75-18VDC to 6.50-18VDC that step down to tightly regulated (±0.6%) output voltages starting as low as 1.5 to 5VDC, within efficiency rates as high as 94%.

 Amazingly it is also pin-to-pin compatible with the TO-220 package, and does not require a heat sink, input and output capacitors or any of the other external components associated with traditional linear regulators. 

 The technical and cost benefits of the AMSR1-78Z’s feature rich design include:

· simplified design process by eliminating the need to add ancillary components;

· designed to operate at full output power without heatsink;

· high efficiency that eliminates the need for forced air cooling below +85°C;

· continuous output short circuit protection;

· more efficient use of valuable PCB board space.

For more information, contact:

Alena Kamin
Customer Service Manager
Hill Technical Sales
216 West Campus Drive
Arlington Heights, IL 60004    
Tel: +1- 847-255-4400  ext 13
Fax: +1-847-255-0192     

You my also visit: http://www.hilltech.com/

Posted in News | Tagged | Leave a comment

IEC Electronics National Sales Event – Attended by Hill Technical Sales

Posted on September 28, 2009 by

IEC Electronics National Sales Event – Attended by Hill Technical Sales

ARLINGTON HIEIGHTS, ILLINOIS, USA, September 28, 2009: Hill Tech Sales, a leader in technical sales solutions for OEM manufacturer today announced they will be attending the October 7th and 8th national training event from IEC Electronics.

IEC makes complete assemblies for electronics in every industry including military, aviation, medical industry and locomotives. These products can be found in military equipment on the battlefield to medical equipment in hospitals. Defense contracts now make up about 39% of the company’s business, up from 5% three years ago.

The company has also increased its workforce. In 2005, IEC employed 120 people, as of September 2009 that has grown to 360.

If you are looking for high reliability contract manufacturing for Military, Medical and other critical applications you need to get us involved.

For more information, contact:

Alena Kamin
Customer Service Manager
Hill Technical Sales
216 West Campus Drive
Arlington Heights, IL 60004    
Tel: +1- 847-255-4400  ext 13
Fax: +1-847-255-0192     

You my also visit www.hilltech.com

Posted in News | Tagged | Leave a comment

WARNING ON COUNTERFEIT PRODUCTS

Posted on September 18, 2009 by

WARNING ON COUNTERFEIT PRODUCTS

ARLINGTON HIEIGHTS, ILLINOIS, USA, September 18, 2009: Aimtec has confirmed that counterfeit versions of its DC/DC converters are being manufactured and sold, by unauthorized distributors, to unsuspecting customers in various regions around the world. “While the company continues to thoroughly investigate their sources,” states Vladimir Serafimov, President of Aimtec Inc., “we must warn customers of the quality and reliability risks associated with the use of counterfeit products.”

Because distinguishing authentic from counterfeit can be difficult, many customers are unaware that they are purchasing counterfeit products.

Authentic Aimtec products are available exclusively from authorized Aimtec distributors. Aimtec’s technical support and 2 year product warranty are provided solely for Aimtec products purchased from one of their authorized distributors.

The company cautions customers from purchasing products from any source other than those listed on its website and warns that products purchased from an unauthorized distributor will not be supported by the company warranty.

Aimtec welcomes any enquires relating to the purchase of authentic Aimtec products. All such enquiries will be actioned immediately.

Posted in News | Leave a comment